How to Easily Drain Gas from Ariens Snowblower: Quick Guide.

To drain gas from an ariens snowblower, first, remove the fuel filter, then disconnect the fuel tank and drain the gas into a container. If you own an ariens snowblower and plan to store it for an extended period or experience problems with the engine starting, then draining the gas is a crucial step to prevent it from going stale and damaging the engine.

In this article, we will guide you with simple steps on how to drain gas from ariens snowblower. By following these steps, you can extend the life of your snowblower and maintain its optimal performance when you use it again.

So, let’s get started!

How to Easily Drain Gas from Ariens Snowblower: Quick Guide.


Preparing Your Ariens Snowblower

Whether you’re ready to prepare your ariens snowblower for storage, winter hibernation, or just need to drain the gas, there are few key things you should do.

Allow The Engine To Cool Down

Allowing your snowblower’s engine to cool down is essential before draining gas or performing any maintenance. Keep in mind that an engine can remain hot for up to 30 minutes after use. Therefore, wait until it’s cool to the touch before performing any maintenance.

Turn The Ignition Switch Off And Remove The Key

Ensure that the ignition switch is off, and the key is removed before you start to drain the gas. Removing the key will prevent any accidental start-ups while you’re working on your snowblower.

Access The Fuel Tank

Accessing the fuel tank is the next step you’ll need to undertake. Familiarize yourself with your snowblower’s manual to locate the fuel tank and other essential components.

Clean The Snowblower

Before draining the gas, it’s essential to clean your snowblower to prevent any debris from getting inside the tank. The process is simple:

  • Disconnect the spark plug wire to eliminate any possible electrical spark.
  • Use a brush to clean the area surrounding the fuel tank.
  • Wipe the fuel cap and opening with a clean cloth, ensuring that no debris is left behind.

Following these steps will ensure you have an easy time draining gas from your ariens snowblower. As always, make sure to refer to your manual if you’re unsure about any of the steps. Proper maintenance not only extends the life of your snowblower but also prevents costly repairs in the future.

Draining The Gas From Your Ariens Snowblower

If you want your ariens snowblower to last longer, you need to perform regular maintenance. One of the essential maintenance tasks is draining gas from the snowblower before long term storage. In this guide, we’ll show you how to drain gas from your ariens snowblower easily.

Removing The Fuel Cap And Draining The Gas

Before starting the draining process, you need to make sure your snowblower is turned off completely. Follow these easy steps to remove the fuel cap and drain the gas:

  • Remove the fuel cap by twisting it counterclockwise and then keep it aside in a safe place.
  • Place a clean container beneath the fuel tank. It can be a gas can or any other suitable container.
  • On the bottom side of the fuel tank, you will find a fuel drain bolt. Loosen this bolt using a wrench until all the gas drains out.
  • Once all the gas has been drained, tighten the drain bolt, and you are done!

Cleaning The Fuel Tank

Cleaning the fuel tank is an important part of gas draining process. It ensures that any debris, dirt, or leftover gas is removed from your ariens snowblower. Follow these simple steps for cleaning the fuel tank:

  • You can either use a clean rag or compressed air to remove any debris or dirt from the fuel tank. Ensure that the tank is clean.
  • Once the tank is clean, you need to put a small amount of fresh gas in the fuel tank.
  • Swirl the gas around in the tank to loosen any debris attached to the tank’s sides.
  • Drain out the fresh gas, and the fuel tank is now clean, ready for the new fuel.

Replacing The Fuel

After cleaning the fuel tank, it is time to replace the old gas with new gas. Make sure to follow these simple steps when replacing the fuel:

  • Refill the fuel tank with fresh gas that has the recommended octane level.
  • Make sure that you do not overfill the fuel tank. Fill it to the recommended level.
  • Once filled, replace the fuel cap by twisting it clockwise.

By following these easy steps, you can drain the gas from your ariens snowblower quickly. Regular gas drainage can help prolong the life of your snowblower. Remember, it’s essential to follow the manufacturer’s instructions for maintenance. Regular maintenance of your ariens snowblower ensures that it operates efficiently and performs well.

Tips For Maintaining Your Ariens Snowblower

To ensure that your ariens snowblower operates smoothly and effectively during winter months, regular maintenance is essential. Here are some best practices that will keep your snowblower in top condition.

Importance Of Regular Maintenance

Regular maintenance is crucial to the longevity and reliable operation of your ariens snowblower. Here’s why:

  • It prevents costly repairs and extends the life of your snowblower.
  • Regular maintenance ensures your safety while operating your snowblower.
  • You’ll save time and money by not needing to purchase a replacement snowblower prematurely.

Best Practices For Winterizing Your Snowblower

Properly winterizing your snowblower is essential to maximize its lifespan. Here are some best practices to ensure your snowblower stays in good condition:

  • Remove all fuel from the fuel tank before storing for the offseason.
  • Change the oil at the beginning and end of the winter season.
  • Cover or store the snowblower in a dry, protected location when not in use.
  • Replace any worn or damaged parts before the next winter season.

Tips For Keeping Your Ariens Snowblower Running Smoothly

Here are some tips to keep your ariens snowblower running smoothly and efficiently:

  • Always use fresh, clean fuel for optimal performance.
  • Check the oil level before each use and change it when necessary.
  • Keep the air filter clean and free from debris.
  • Inspect belts, auger blades, and other critical parts often, replacing them when required.
  • It’s not recommended to modify or remove any of the safety features that come with your snowblower.

By following these tips for maintaining your ariens snowblower, you can ensure safe and effective operation for many years to come. Remember, proper maintenance and care will significantly extend the life of your snowblower.

Frequently Asked Questions On How To Drain Gas From Ariens Snowblower

How Do I Know If I Need To Drain The Gas From My Ariens Snowblower?

If you haven’t used your ariens snowblower in a while or are experiencing issues with the engine starting, it may be time to drain the old gas and replace it with fresh fuel.

What Materials Do I Need To Drain Gas From My Ariens Snowblower?

To drain gas from your ariens snowblower, you’ll need a fuel stabilizer, a fuel siphon, a bucket or gas can, gloves, and safety glasses.

How Do I Drain Gas From My Ariens Snowblower?

First, add fuel stabilizer to the gas tank, then run the engine for a few minutes to circulate the stabilizer. Next, use a fuel siphon to transfer the old gas into a bucket or gas can. Dispose of the old gas properly.

Can I Reuse The Old Gas I Drained From My Ariens Snowblower?

No, it’s not recommended to reuse old gas as it can affect the performance of your snowblower’s engine. Always use fresh fuel for optimal performance.

How Often Should I Drain The Gas From My Ariens Snowblower?

You should drain the gas from your ariens snowblower at least once a season, preferably before storing the snowblower for an extended period of time. This will help keep your engine running smoothly and prevent issues with starting.

Do I Need To Take My Ariens Snowblower To A Professional To Drain The Gas?

No, draining the gas from your ariens snowblower is a simple task that you can do yourself with the right materials and proper safety precautions.


So, that’s it! You now know how to properly drain gas from your ariens snowblower. Remember to take the needed safety precautions, such as using gloves and working in a well-ventilated area. Make sure to dispose of the fuel properly, and store it in an approved container.

Routine maintenance, such as draining the gas, is crucial to keeping your snow blower performing efficiently year after year. If you have any additional questions or issues, consult the user manual or reach out to a professional for assistance. With a little bit of effort, you can have a snow blower that runs smoothly and lasts for a long time.

Stay safe and happy snow blowing!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
error: Content is protected !!