How to Fix Ohms Too Low in Novo 4: A Step-by-Step Guide.

To fix ohms too low novo 4, adjust the pod’s connections or clean the coil. The ohms too low error usually indicates a problem with the connection between the pod and the device or the coil’s poor contact with the pod base.

With a few simple adjustments and cleaning, this error can often be resolved. However, if the problem persists, it may be time to replace the coil or the entire pod. The novo 4 is a popular vaping device that features a range of advanced settings and a sleek, modern design.

Whether you’re new to vaping or a seasoned pro, learning how to troubleshoot common issues like ohms too low errors can help you enjoy a more satisfying and consistent vaping experience.

How to Fix Ohms Too Low in Novo 4: A Step-by-Step Guide.


Understanding Ohms Too Low Error In Novo 4

Definition Of Ohms Too Low Error

Ohms too low error is a common error message that appears in novo 4, a popular vape device. This error message indicates that the resistance of the atomizer coil is lower than the minimum recommended level, which can cause serious safety issues.

Here are some key points to keep in mind:

  • The resistance of the atomizer coil is measured in ohms. The lower the resistance, the higher the power output of the vape device.
  • Novo 4 has a minimum resistance limit of 0.4 ohms. If the resistance drops below this limit, the device will display the ohms too low error message.
  • Ohms too low error can be caused by various factors, including coil damage, incorrect installation, or hardware malfunction.

Causes Of Ohms Too Low Error

There are several factors that can cause the ohms too low error message to appear on novo 4. Here are some of the most common causes:

  • Coil damage: The coil inside the atomizer can get damaged due to regular wear and tear. This can cause the resistance to drop below the minimum limit and trigger the ohms too low error.
  • Incorrect installation: If the atomizer is not installed properly, it can cause the coil to make poor contact with the device. This can affect the resistance reading and trigger the error message.
  • Hardware malfunction: It’s possible that the device itself is malfunctioning, which can cause inaccurate readings and trigger the ohms too low error.

Why Fixing Ohms Too Low Error Is Important

Fixing the ohms too low error is essential to ensure safe vaping. Here are some reasons why it’s important to address this error message:

  • Safety concerns: When the resistance drops below the minimum limit, the device can deliver a higher power output than intended. This can increase the risk of overheating, battery failure, and other safety concerns.
  • Poor vaping experience: An atomizer coil with low resistance can produce poor quality vapor and affect the overall vaping experience.
  • Extending device lifespan: Fixing the ohms too low error can help extend the lifespan of the device and prevent costly repairs or replacements.

Step-By-Step Guide To Fixing Ohms Too Low In Novo 4

Precautions To Take Before Fixing Ohms Too Low In Novo 4

Before attempting to fix the ohms too low issue in novo 4, there are some essential precautions that you must take. These precautions are:

  • Turn off the device completely before starting the process.
  • Remove the pod from the device and clean it thoroughly with a tissue or a cotton swab.
  • Check the spring-loaded contacts in the device to ensure that they are not damaged or dirty.
  • Always make sure that the device is in good condition and not damaged to prevent any electrical short circuits.
  • Consult the user manual or contact the manufacturer if you are not confident about fixing the issue by yourself.

Steps To Fix Ohms Too Low In Novo 4

If you’re experiencing ohms too low in novo 4, you can follow these steps to fix it quickly and efficiently:

  • Check the coil:
  • Remove the pod from the device by pulling it out of the slot.
  • Use a tissue or a cotton swab to wipe out any liquid from the contacts on the device and the pod.
  • Examine the coil for any damage or disconnected leads.
  • If you notice any damage, replace the coil.
  • Adjust the pin:
  • Use a small screwdriver or tweezers to adjust the pin in the device’s connector and move it up slightly.
  • Re-insert the pod and screw it into place, ensuring that everything is secure.
  • Clean the contacts:
  • Remove the pod and clean its contacts and the device’s contacts with a tissue or a cotton swab dipped in rubbing alcohol.
  • Make sure that the contacts are completely dry before re-inserting the pod.
  • Turn on the device and check if the issue has been fixed.
  • Contact the manufacturer:
  • If none of these steps fix the issue, contact the manufacturer or authorized repair center for further assistance.
  • Avoid trying to fix the issue by yourself, which could result in more damage to the device.

By following these steps, you’ll be able to fix the ohms too low issue in your novo 4 and enjoy a smooth vaping experience.

Tips To Avoid Ohms Too Low Error In Novo 4

The smok novo 4 is a great vape device that offers an enjoyable and satisfying vaping experience. However, there might be times when you experience an “ohms too low” error message. This error message occurs when the resistance of your coil is too low for the device to handle, and it can be frustrating.

To avoid getting this error, here are some essential tips:

Proper Maintenance Of The Device

  • Clean your device regularly to avoid damage to the coils and tank.
  • Ensure that the battery is charged fully before use. A low battery might cause the device to give the ohms too low error message.
  • Keep your device away from water, excessive heat, and direct sunlight.

Checking For Compatibility Of Coils And Tanks

  • Before attaching a new coil to your device, ensure that it is compatible with the novo 4.
  • Check the resistance of the coil and ensure it falls within the device’s recommended range.
  • Always replace your coils with the same brand and resistance rating as the original one.

Using Authentic Parts And Accessories

  • Always use authentic parts and accessories made specifically for the smok novo 4.
  • Avoid using cheap or counterfeit accessories as they might damage your device, cause leaks, or fire.
  • Change your accessories like coils, tanks and drip tips regularly to avoid any wear and tear.

By following these tips, you can enjoy an excellent vaping experience with your smok novo 4 without experiencing the ohms too low error message. Remember to follow the manufacturer’s instructions and avoid taking shortcuts, and you will enjoy a safer and pleasant vaping experience.

What If The Problem Persists?

If you’ve tried the steps provided in our previous section and still experiencing a low ohm reading in your novo 4 vape device, don’t fret! There may be other factors causing the issues. Read on to find out what you should do if the problem persists.

Reasons Why The Problem May Persist

  • Corrosion: If the battery contact points or tank threads have become corroded, the ohm reading may continue to be low. In this case, it’s best to clean them with a cotton swab and some rubbing alcohol.
  • Coil resistance: The coil you’re using may have a low resistance, naturally leading to a low ohm reading. Make sure to check the recommended resistance range for your device before installing a new coil.
  • Faulty meter: There may be a defect in your device’s ohm meter, causing it to consistently read low. In this case, it’s best to contact the manufacturer or seek professional help.

Additional Steps To Take If The Problem Persists

  • Rebuild: If you’re using a rebuildable atomizer, try rebuilding the coil with a higher resistance wire to increase the ohm reading.
  • Check battery: If your device has replaceable batteries, make sure they are fully charged and not damaged. Low battery power may also lead to low resistance readings.
  • Change mod: Similarly, if you’re using a mod with adjustable wattage or voltage, try changing or adjusting it to see if it affects the ohm reading.

When To Seek Professional Help

If the problem persists even after trying the steps mentioned above, it may be time to seek professional help.

  • Contact the manufacturer: If your device is under warranty, contact the manufacturer to get it fixed or replaced.
  • Visit a vape store: If your device is no longer under warranty, visiting a vape store can be a good option. A professional can diagnose and fix the issue- whether it’s a faulty meter or a more complicated hardware issue.

Remember to always practice safety when dealing with vape devices. Don’t attempt to fix hardware issues that you’re not comfortable dealing with, and always turn off your device before trying any fixes.

Frequently Asked Questions For How To Fix Ohms Too Low Novo 4

How Do I Know If My Novo 4 Has Ohms Too Low?

If your novo 4 has ohms too low, it will display an error message on the device screen. You may also experience a burnt taste or no vapor production.

What Causes Ohms Too Low In Novo 4?

Ohms too low in novo 4 can be caused by low resistance in the atomizer coil, coil short circuit or incorrect installation of the coil. It may also be caused by a worn-out coil or damage to the device.

How Do I Fix Ohms Too Low On Novo 4?

To fix ohms too low on novo 4, try cleaning the base and coil connections, tighten the coil securely, and ensure proper installation. If the problem persists, replace the coil or contact the manufacturer.

Can I Still Use My Novo 4 If It Has Ohms Too Low?

No, it is not safe to use your novo 4 if it has ohms too low as it can damage the device or cause injury. Stop using the device immediately and troubleshoot the issue.

How Do I Prevent Ohms Too Low In My Novo 4?

To prevent ohms too low in your novo 4, ensure proper installation of the coil, use compatible coils, and replace worn-out coils as required. Regular cleaning and maintenance of the device can also prevent ohms too low errors.


Fixing ohms too low in novo 4 requires careful attention and accurate troubleshooting. We have gone through all the possible causes of this issue, and we came up with simple and practical solutions. The first thing to remember is to check your coil and ensure that it is correctly installed.

If the coil is indeed installed correctly, then try cleaning your tank and connectors to prevent any connection glitches. If those basic solutions do not work, you can try updating your device’s firmware or replacing your coil with a new one.

Take care to choose the correct coil resistivity level for your device and stay within the recommended wattage range when setting your voltage. By following these simple steps, you can fix your novo 4 ohms too low issue efficiently and quickly, ensuring that you enjoy uninterrupted vaping sessions.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
error: Content is protected !!